• How to make a TV antenna?

    Watch the video

    How to make a TV antenna?

    Despite the fact that there are a huge variety of antennas for TV in the stores, there are cases when the device cannot be bought for some reason. In this case, you can independently make the device from the improvised material.

    Consider how to make a TV antenna with your own hands.

    Simple television antenna

    First way

    1. Take copper or brass wire and remove the insulating material from both ends. To make a homemade antenna last longer, aluminum wire for this purpose will not work due to the rapid oxidation of the metal;
    2. One end of the wire must be connected to the pins of the TV connector (you can wrap it around the connector);
    3. Attach the other end to the battery or pipe.

    In this method, the pipe is a kind of conductor of a television signal, and the necessary frequencies are amplified. In this way you can easily catch up to five or six channels.

    Second way

    This method requires a balcony in your apartment.The method is similar to that described above, but in this case a longer wire is required.

    1. Take the wire and remove the insulating material from both ends;
    2. One end of the wire must be connected to the pins of the TV connector (you can wrap it around the connector);
    3. Attach the other end to the clothesline.

    The second method will allow you to catch more channels. In addition, the image quality will be much higher.

    You can find other ways to make homemade antennas in the articles How to make an antenna yourself and How to make a home antenna.

    Satellite antenna

    For those who live far from the city, but want to enjoy their favorite programs, a simple TV antenna, unfortunately, will not work. Not everyone can buy a satellite dish, but it is quite possible to make it yourself.

    Necessary materials

    • umbrella;
    • foil sheets;
    • nylon thread;
    • plasticine;
    • Scotch;
    • copper cable for antenna;
    • can;
    • TV signal amplifier with power supply.

    Manufacturing process

    1. Open an umbrella and measure the distance between the spokes, as well as the length of the material (measurements must be made for the triangular sector of the umbrella);
    2. Transfer the calculations to a sheet of foil and cut the required number of triangles;
    3. Sew the parts to the fabric base of the umbrella from the inside;
    4. Remove the insulation material from the cable (about four centimeters);
    5. Cut the cable sheath (screen);
    6. Cut an oval out of a tin can and make a hole in the center with an awl;
    7. Pass the cable core through the hole and solder the contact;
    8. Stick a small piece of clay to the junction;
    9. Wind up the resulting receiver to the handle of an umbrella with adhesive tape;
    10. Place a signal amplifier with a power supply near the TV;
    11. Self-made satellite dish must be fixed in such a way that she looked at the television tower;
    12. Begin to tune the channels, turning the antenna in different directions.

    With such uncomplicated methods, you can make both a regular and satellite dish for TV.


    Related news


    What to give a son-in
    Egyptian Earrings
    How to treat a dog
    What is foam block
    How to open mdf